Battery Drum pump - B1 Battery PP
suitable for small quantities
- Order number: US-0207-112
- Price: upon request
- not suitable for flammable liquids
Immersion depth: 500 mm (sealless)
Description:
The Drum pump B1 Battery is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources.
- Replaceable, powerful battery with Li-Ion
- Battery life 25 min at maximum speed
- 1 battery charge emptied approx. 2 x 200 litre container
Features & Advantages
- BLDC Motor with high efficiency of up to 70
- infinitely variable
- long battery life
- automatic shutdown on overload
- sophisticated quick lock
| Suitable media: | Akkusäure, Ammoniakwasser, Fotoentwickler, Fotofixierer, Glykol, Phosphorsäure, Salzsäure, Wasserstoffperoxid |
| Pump tube (material): | PP (polypropylene) |
| Impeller (material): | PP (polypropylene) |
| Static seal (material): | no seals in contact with the medium |
| Mechanical seal (material): | no seals in contact with the medium |
| Bearing (material): | ETFE / PTFE |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Flow rate (up to max. GPM)*: | 5,3 |
| delivery head (up to max. ft)*: | 20 |
| Temperature of medium (max °F): | 104 |
| density (up to kg/dm³): | 1.3 |
| Viscosity (up to max. cps)*: | 200 |
| Type of impeller: | Radial-flow impeller |
| Seal type: | Sealless (SL) |
| Immersion length: | up to 19" (500 mm) |
| Immersion tube diameter (up to mm): | 0.98 |
| Thread (inch) outside: | 1" |
| Type of drive: | Battery |
| Output (W): | 70 |
| Voltage: | 10,8 |
| Capacity (Ah): | 1,5 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter