Lutz Pumpen | Auslaufbogen Edelstahl zur Montage am Schlauchende
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)
Outlet bend

Outlet bend

for mounting at the end of the hose (PURE version)

Nominal width:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0370-098
  • op verzoek
  • Suitable for pumping flammable and combustible liquids (e.g. ethanol, petrol) or in potentially explosive atmospheres.
Description: By mounting on the end of the hose, the discharge elbow allows liquids to be...more
Product information "Outlet bend"

Material: Stainless steel (1.4301)
Nominal size: DN 32


Nominale diameter: Tri-Clamp DN 32

Description:

By mounting on the end of the hose, the discharge elbow allows liquids to be transferred or discharged directly into another container. 

  • Material: stainless steel (1.4301)
  • Nominal widths: DN 32 / 40

Properties & advantages

  • Enables quick and direct transfer of liquids
  • Seal made of EPDM
Technical data
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Produktgruppe: Exzenterschneckenpumpen
Accessories group: Hoses / Discharge spouts / Suction pipe

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support