Lutz Pumpen | Lebensmittelpumpe (lebensmittelecht)
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)

Eccentric screw pump tube B70V SanitaryPlus

for three-phase motors

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • US-0172-548
  • upon request
  • The stator of the pumping station is made of the material EPDM (ethylene-propylene-diene-rubber)
Description: The B70V SanitaryPlus food pump is a powerful positive displacement pump for...more
Product information "Eccentric screw pump tube B70V SanitaryPlus"

Delivery rate: 50 l/min. 
Seals: EPDM (ethylene propylene diene rubber)
Note: The connection to the discharge connection of the pumping station is made with a Tri-Clamp connection


Description:

The B70V SanitaryPlus food pump is a powerful positive displacement pump for heavy-sensitive, viscous media with and without fiber or solids content up to the limits of flowability. It pumps liquid foodstuffs, active pharmaceutical ingredients and cosmetic products from a wide variety of containers and delivery packages. The pump meets the requirements of hygienic design and is certified according to the "3-A Sanitary Standards". 

  • also available in special immersion depths
  • equipped as standard with a carrying handle and a Motor quick-release fastener
  • Media examples: liquid foodstuffs and semi-luxury foods, pharmaceutical agents and cosmetic products

Features & Benefits

  • Threadless, manually releasable quick connectors in the wetted area
  • Quick and easy disassembly
  • Simple and fast cleaning
  • Gentle, low-pulsation product conveying
  • Certified and approved according to the current "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps Number 02-"
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Edelstahl (1.4404)
Static seal (material): EPDM
Mechanical seal (material): SIC, Kohle, EPDM
Drive shaft (material): Edelstahl (1.4571)
Stator (Werkstoff): EPDM (Ethylen-Propylen-Dien-Kautschuk)
Rotor (Werkstoff): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
delivery head (up to max. psi)*: 116
Temperature of medium (max °F): 212
Viscosity (up to max. cps)*: 100000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Seal type: Mechanical seal (MS)
Immersion length: 1100
Immersion tube diameter (up to mm): 2.1
Statorgröße: 50.1
▼ PUMPE | PUMP | POMP ▼
Druckstutzen (DN): 50
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Certification: 3-A Sanitary Standard
Type: B70V-H-D SanitaryPlus

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support