Verdrängerpumpe, EX-geschützte Exzenterschneckenpumpe für Kosmetik
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)
Eccentric screw pump tube B70V-SR in PURE version

Eccentric screw pump tube B70V-SR in PURE version

with reduction gear for electric motors up to 230 Volt

Drive shaft:

Delivery rate:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • US-0174-014 + 0172-128
  • upon request
  • For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator.
Description: The Eccentric screw pump B70V-SR (with reduction gear) in PURE design is...more
Product information "Eccentric screw pump tube B70V-SR in PURE version"

Delivery rate: 12 l/min. 
Drive shaft: Torsion shaft (TW)
Note: 
  The connection to the discharge connection of the pumping station is made with a Tri-Clamp connection


Description:

The Eccentric screw pump B70V-SR (with reduction gear) in PURE design is suitable for conveying water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various electric and pneumatic motors are available, which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources.

  • also available in special diving depths
  • Pump tube equipped with Lutz original handwheel
  • Examples of media: viscous cosmetic products, food and etc.

Features & Advantages

  • Uniform volume flow
  • Easy and quick cleaning
  • Gentle, low-pulsation product conveying
  • Low wear
  • Ideal for mobile use
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Housing Material: Stainless Steel
Pump tube (material): Edelstahl (1.4571/1.4404)
Static seal (material): FPM (fluororubber)
Mechanical seal (material): WC, SiC, FPM
Drive shaft (material): Edelstahl (1.4571)
Stator (Werkstoff): PTFE (Polytetrafluorethylen)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
delivery head (up to max. psi)*: 87
Temperature of medium (max °F): 284
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Torsionswelle (mittelviskose Medien)
Seal type: Mechanical seal (MS)
Immersion length: from 39" (1000 mm)
Immersion tube diameter (up to mm): 2.1
Statorgröße: 12.1
▼ PUMPE | PUMP | POMP ▼
Druckstutzen (DN): 50
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion Protection: No
Connection: Tri-Clamp
Certification: FDA-compliant, Verordnung (EG) 1935/2004
Type: B70V-SR Pure

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Food
EPDM gasket
Eccentric screw pump tube B70V-SR in PURE version Eccentric screw pump tube B70V-SR in PURE version
with reduction gear for electric motors up to...
Service & Support