Pumpwerk PVDF
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)
Pump tube PVDF

Pump tube PVDF

for concentrated acids and alkalis

Immersion depth:

Seals:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • US-0122-204
  • upon request
  • not suitable for flammable liquids
Description: The Lutz Pump tube (PVDF) is suitable for corrosive, aqueous to slightly...more
Product information "Pump tube PVDF"

Diving depth 700 mm
Seal type: Sealless (DL)


Description:

The Lutz Pump tube (PVDF) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. 

  • also available in special immersion depths from 200 - 2500 mm
  • Pump tube equipped with Lutz original hand wheel

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Optimised Drum emptying
  • Universally resistant PTFE shaft bearings
  • Maintenance without special tools
  • Seal modules of the mechanical seal (MS) or sealless (SL) pump can be replaced
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): PVDF (polyvinylidene fluoride)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): ETFE / PTFE
Drive shaft (material): Hastelloy C (2.4610)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to max. GPM)*: 24
delivery head (up to max. ft)*: 69
Temperature of medium (max °F): 212
density (up to kg/dm³): 1.9
Viscosity (up to max. cps)*: 800
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length: from 19" (500 mm)
Immersion tube diameter (up to mm): 1.6
Thread (inch) outside: 1 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Type: PVDF 41-L-DL

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support