
Immersion depth: 1000 mm
Type of seal: mechanical seal (GLRD)
Description:
The Lutz Pump tube (Niro) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources.
- also available in special immersion depths from 200 - 2500 mm
- Pump tube equipped with Lutz original handwheel
- Suitable for mixing and pumping alternative fuels, oils, flammable liquids
Features & Advantages
- Also available with Tri-Clamp connection
- Optionally with electric or compressed air drive
- Two functions (pumping and mixing) in one unit
- No leakage when the pumping unit is tilted or repositioned
- High mixing and conveying capacity for thorough homogenization
- Switching between the pumping and mixing functions takes place without disturbing the ongoing operation, which is made possible by a small lever on the handwheel
Pump tube (material): | Niro (Edelstahl) |
Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
Static seal (material): | FPM (fluororubber) |
Mechanical seal (material): | Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571) |
Bearing (material): | Edelkohle |
Drive shaft (material): | Edelstahl (1.4571) |
Flow rate (up to max. GPM)*: | 24 |
delivery head (up to max. ft)*: | 69 |
Temperature of medium (max °F): | 122 |
density (up to kg/dm³): | 1.4 |
Viscosity (up to max. cps)*: | 650 |
Type of impeller: | Axial-flow rotor |
Seal type: | Mechanical seal (MS) |
Immersion length: | from 39" (1000 mm) |
Immersion tube diameter (up to mm): | 1.6 |
Thread (inch) outside: | 1 1/4" |
Explosion Protection: | Yes |
Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU) |
Type: | MP Niro 50/41-R GLRD |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler