EX-geschützte ATEX Fasspumpe elektrisch, pneumatisch für Benzin
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)

Drum pump - Explosive media

for highly flammable hydrocarbons

Immersion depth:

Motor:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • US-0150-004 + 0040-200
  • upon request
  • is suitable for the Ex - area
Description: The Drum pump is suitable for low viscosity, flammable and combustible...more
Product information "Drum pump - Explosive media"

Motor: ME II 3 - 460W, 230V
Immersion depth: 1000 mm (sealless)


Description:

The Drum pump is suitable for low viscosity, flammable and combustible hydrocarbons. Perfectly suited for the removal or decanting of solvents.

  • Optionally available with Ex - plug
  • Pump tube equipped with Lutz original hand wheel
  • Suitable for filling or transferring alternative fuels, oils, flammable liquids

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Highly resistant noble carbon shaft bearings
  • Maintenance without special tools
  • Seal modules of the seal-less (SL) pump can be replaced
  • Approved according to ATEX directive 2014/34/EU, category 1/2
Technical data
▼ MEDIUM ▼
Suitable media: Essigsäure, Butanol, Styrol, Toluol, Nikotin, Butylacetat, Äththylacetat, Aceton, Ameisensäure, Ethanol, Benzin, Petroleum, Methanol, Kerosin, Isopropanol
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Niro (Edelstahl)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): Edelkohle
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to max. GPM)*: 27
delivery head (up to max. ft)*: 56, 66
Temperature of medium (max °F): 212
density (up to kg/dm³): 1,7, 2.8
Operating pressure (max. psi): 87
Viscosity (up to max. cps)*: 750, 1000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length: from 39" (1000 mm), from 47" (1200 mm)
Immersion tube diameter (up to mm): 1.6
Thread (inch) outside: 1 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Type of drive: Electric, Compressed air
Output (W): 640, 1000
Voltage: 120
Frequency (Hz): 60
Version: mit Unterspannungsauslöser, Komfortgriff

* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt.

** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler

Service & Support