Mineral oil hose | Double Diaphragm Pumps | Accessories | Products | Lutz - USA
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)
Mineral oil hose

Mineral oil hose

for oils such as diesel, machine oils and heating oils

Nominal width:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0374-462
  • op verzoek
  • suitable for flammable and easily combustible liquids (e.g. ethanol, petrol) or in explosive environments
Description: The Hose is suitable for petroleum products of all types and super up to 50%...more
Product information "Mineral oil hose"

Nominal size: DN 25 (1")
Materials: Inner rubber NBR and outer rubber NBR
Note: Electrically conductive: Type Ω-CL (<106 Ohm between fittings) according to TRbF 50 Appendix B (TRbF 131/2).


Nominale diameter DN 19 (3/4")

Description:

The Hose is suitable for petroleum products of all types and super up to 50% aromatics and methanol content. The inner rubber consists of the material NBR and the outer rubber of either CR (Chloroprene) or NBR. The Hose is electrically conductive so that it can also be used in explosive environments.

  • Nominal size: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50

Features & advantages

  • Operating pressure up to max. 16 bar
  • Colour coding: "Yellow
Technical data
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Temperature of medium (max °F): 65 , max. 194 °F
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion Protection: Yes
Certification: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU)
Produktgruppe: Fasspumpen / Containerpumpen, Exzenterschneckenpumpen, Membranpumpen
Accessories group: Hoses / Discharge spouts / Suction pipe

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Ex-protection
DN 25 (1")
max. 16 bar
Universal chemical hose Universal chemical hose
for chemicals, food and hygiene products
Ex-protection
DN 25 (1")
max. 16 bar
Special chemical hose PTFE Special chemical hose PTFE
for common and high purity media
Service & Support