Family business since 1954
International branch
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)
Pump Set B2 Battery SS with rotor

Pump Set B2 Battery SS with rotor

Immersion length:

For thin-bodied fluids   e. g. Naphthalene, sodium hypochlorite, perchloric acid, nitric...more
Immersion length: 19" / 500 mm (sealless)
suitable for filling from small vessels such as canisters or hobbocks
Conditionally safe to run dry

For thin-bodied fluids 
e. g. Naphthalene, sodium hypochlorite, perchloric acid, nitric acid etc.

Features:

  • Infinitely variable speed controller allows a controlled filling of smaller and larger liquid amounts
  • Automatic switch-off at overload
  • Replaceable with Li-Ion technology
  • Wear-free, low noise BLDC motor
  • Lube free pump tube, thus no contamination of the liquid
  • Optimized drum drainage
  • Modular, service friendly design
  • Wide range of applications possible due to sealless construction
  • Service-friendly and simple to dismantle
  • Axial-flow rotor (R) for higher flow rates

Benefits:

  • Variable flow rate for a convenient and safe transfer
  • High battery capacity
  • Long service life due to BLDC motor
  • Sealless construction (MSL) cannot fail by dry running
  • Lube-free pump tube, thus no contamination of the liquid
  • All-purpose resistant ETFE/PTFE shaft bearing
  • Easy maintenance without special tools

Pump set consisting of:
Motor B2 Battery, Pump tube  PVDF 32-R MSL in polyvinylidene fluoride, 1.5 m special chemical hose 3/4", hose clips, nozzle PVDF (Battery and charging station not included)

Material: PVDF (polyvinylidene fluoride)
Explosion Protection: not explosion-proof
Technical data: Pumpset B2 Battery with PVDF 32-R MSL Performance 260...
Technical data: Pumpset B2 Battery with PVDF 32-R MSL
Performance 260 watts
Voltage 21.6 volts
Capacity 4 Ah
Weight with battery 2.51 lb (1140 g)
Immersion tube diameter 1.25 in (32 mm)
Wetted materials PVDF, Hastelloy C, FPM, PTFE, ETFE
Impeller rotor (for higher flow rates)
Temperature of medium 5 up to 144 °F (-15 up to +60 °C)
Hose connection G 1 OT
Immersion depth 19" (500 mm)
   
Capacity  
Delivery rate  max. 21.1 GPM (11.9 GPM)
max. 80 l/min. (45 l/min)
Delivery head  max. 26 ft. (8 m wc)
Viscosity  max. 400 cps
Density 1.6 kg/dm³


Notice:

The density values specified in the table are reduced when pumping liquids with a viscosity of more than 1 cps.
The viscosity values specified in the table are reduced when pumping liquids with a specific density of more than 1 kg/dm³.

When using a nozzle the delivery rate is reduced to approximate values (information in the brackets).