Pump Set B1 Battery PP with impeller, with flow meter

Order number: 0207-093

Any questions?

Phone: 800 8 43 39 01 (toll free)
Email: info@lutzpumpsamerica.com

For thin-bodied fluids such as battery acid, glycols, phosphoric acid, hydrochloric...more

Close menu

Immersion depth: 39" / 1000 mm (sealless)
suitable for emptying 200 l drums
Conditionally safe to run dry

For thin-bodied fluids
such as battery acid, glycols, phosphoric acid, hydrochloric acid, ammonia water, etc.

Features:

Small to medium quantities
Low power
Low viscosity < 200 mPas
Low pressures / low flow rates
Low density < 1.3 kg / dm³
Automatic switch-off at overload
Replaceable with Li-Ion technology
Step-less control for all requirements
Easy handling by compact design and very low weight
Wear-free, low noise BLDC motor
Easy disassembly with quick action coupling

Benefits:

BLDC motor with a high level of effi ciency up to 70%
Infinitely varied
Modular construction
Low weight
High battery capacity
Long service life due to BLDC motor
Low noise ≤ 70 dBA
Sophisticated quick-action coupling
Motor combinable with pump tubes in PP, PVDF and stainless steel

Pump set consisting of:
Motor B1 Battery, Pump tube PP 25-L MSL in polypropylene, flow meter TR 90 PP, 1.5 m PVC hose 3/4", hose clips, Lutz-nozzle PP (Battery and charging station not included)

Technical data: Pumpset B1 Battery PP with impeller Performance 70...

Technical data:	Pumpset B1 Battery PP with impeller
Performance	70 watts
Voltage	10.8 volts
Capacity	1.5 Ah
Weight with battery	1.3 lb (590 g)
Immersion tube diameter	1 in (25 mm)
Wetted materials	PP, PVDF, Hastelloy C, PTFE, FPM, ETFE
Impeller	impeller (for higher delivery head)
Temperature of medium	32 up to 104 °F (0 up to +40 °C)
Hose connection	G 3/4 OT
Immersion depth	39" (1000 mm)

Capacity
Delivery rate	max. 5.28 GPM (20 l/min.)
Delivery head	max. 20 ft. (6 m wc)
Viscosity	max. 200 cps
Density	1.3 kg/dm³

Notice:
The density values specified in the table are reduced when pumping liquids with a viscosity of more than 1 cps.
The viscosity values specified in the table are reduced when pumping liquids with a specific density of more than 1 kg/dm³.