Pumpenset zur Restentleerung - Explosionsgefährliche Medien
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)

Pump Set for residual discharge - Explosive media

for aggressive and highly inflammable liquids

Immersion depth:

Motor:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • US-0205-511-1
  • upon request
  • is suitable for the Ex - area
Description: The Pump Set is suitable for low viscosity, flammable and combustible liquids...more
Product information "Pump Set for residual discharge - Explosive media"

Motor: ME II 3 - 460W, 230V
Immersion depth: 1000 mm (mechanical seal)


Description:

The Pump Set is suitable for low viscosity, flammable and combustible liquids and hydrocarbons. Perfectly suitable for the withdrawal or transfer of explosive media and solvents.

  • Optionally available with Ex - plug
  • Pump tube equipped with Lutz original hand wheel
  • Suitable for Drum emptying alternative fuels, oils, flammable liquids

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Optimized Drum emptying with remaining quantity of approx. 0.1 litres
  • No leakage in case of inclined position or repositioning of the pumping unit
  • Maximum product utilisation with reduced drum cleaning and disposal costs
  • Approved according to ATEX directive 2014/34/EU, category 1/2
Technical data
▼ MEDIUM ▼
Suitable media: Styrol, Toluol, Nikotin, Butylacetat, Äththylacetat, Aceton, Essigsäure, Ameisensäure
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Niro (Edelstahl)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): FEP ummantelt
Mechanical seal (material): Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571)
Bearing (material): Edelkohle
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to max. GPM)*: 18,5, 48
Flow rate with Nozzle: 13,2
delivery head (up to max. ft)*: 49, 118
Temperature of medium (max °F): 212
density (up to kg/dm³): 1,7, 2.8
Operating pressure (max. psi): 87
Viscosity (up to max. cps)*: 600, 1000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Radial-flow impeller
Seal type: Mechanical seal (MS)
Immersion length: from 39" (1000 mm), from 47" (1200 mm)
Immersion tube diameter (up to mm): 1.6
Thread (inch) outside: 1 1/4"
▼ SCHLAUCH | HOSE | SLANG ▼
Schlauchlänge (mm): 78
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Type of drive: Electric, Compressed air
Output (W): 640, 1000
Voltage: 120
Frequency (Hz): 60
Version: mit Unterspannungsauslöser

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support