Tank, Container entleeren über Bodenablauf | IBC Pumpe mit EX-Schutz
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)

Pump tube B200 Niro*

for food (PURE Ex-Series)

Seals:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • US-0151-403
  • upon request
  • The designation PURE includes the approvals ATEX, FDA and the regulation (EG) 1935/2004
Description: The horizontal Pump tube is suitable for emptying aqueous and fatty food from...more
Product information "Pump tube B200 Niro*"

Seal type: Mechanical seal FPM (GLRD FPM)
Design: with Pure Ex
Note: with Ex-approval


Description:

The horizontal Pump tube is suitable for emptying aqueous and fatty food from IBC containers or tanks and is the perfect alternative to vertical Drum Pumps.
Depending on the application, various Motors are available which can be combined with the Pump tube at any time. This gives you flexibility at all times and saves important resources.

  • Horizontal connection on the bottom run of the container
  • Pump tube equipped with Lutz original hand wheel
  • also for foodstuffs containing alcohol, cosmetics and pharmaceutical products as well as flammable cleaning agents

Features & Advantages

  • Optionally with electric or compressed air drive
  • Low loss of the medium when disconnected
  • Food grade connections
  • Low space requirement
  • Approved according to ATEX directive 2014/34/EU, category 1/2
  • Approved according to FDA and regulation (EG) 1935/2004
Technical data
▼ MEDIUM ▼
Suitable media: Pflegemittel, Mineralöle, Reinigungsmittel, Pflanzenöle, Säuren, Laugen, Wasser, Lösemittel, Desinfektionsmittel, Emulsionen
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Niro (Edelstahl)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): FPM (fluororubber)
Bearing (material): Edelkohle
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to max. GPM)*: 244
delivery head (up to max. ft)*: 15
Temperature of medium (max °F): max. 212 °F
density (up to kg/dm³): 2.8
Viscosity (up to max. cps)*: 1000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Axial-flow rotor
Seal type: Mechanical seal (MS)
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion Protection: Yes
Certification: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU), FDA-compliant, Verordnung (EG) 1935/2004
Type: B200 Niro 41-R-GLRD

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support