Family business since 1954
International branch
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)
Pump tube for mixing and pumping, PP with rotor, shaft HC

Pump tube for mixing and pumping, PP with rotor, shaft HC

Suitable for mixing and pumping of corrosive and neutral, aqueous up to slightly viscous...more
Immersion length: 1000 mm (sealless)
suitable for emptying 200 l drums

Suitable for mixing and pumping of corrosive and neutral, aqueous up to slightly viscous liquids in non-explosive areas.

Liquid examples:
Emulsions, suspensions and dispersions, paints and lacquers

Features:

  • Two functions („pumping“ and „mixing and pumping“) in one unit
  • Optional with electric or air driven motors
  • No grease fillings
  • Modular, service friendly design
  • Axial-flow rotor (R) for higher flow rates 

Benefits:

  • Change between "pumping" and "mixing and pumping" without moving during operation via a small lever below the handwheel
  • High mixing performance and flow rate for thorough homogenisation and rapid drainage
  • Lube-free pump tube, thus no contamination of the liquid

Special lengths 23"-98" / (600-2500 mm) on request.

Note: The drum must always be covered during the mixing process.

Material: PP (polypropylene)
Explosion Protection: not explosion-proof
PURE version: without PURE version
Materials MP-PP-SL Housing: Polypropylene Bearing: ETFE/PTFE...
Materials MP-PP-SL
Housing: Polypropylene
Bearing: ETFE/PTFE
Drive shaft: Hastelloy C (2.4610)
Impeller: Polypropylene
Immersion tube diameter: max. 50 mm
Temperature of medium: max. 50 °C
Hose connection: G 1 1/4 OT
   
Capacity  
Pump capacity:* max. 170 l/min
Pumping head:* max. 12 m wc
Viscosity:** max. 350 mPas

 

* determined with water at 20 °C **determined with oil