Lutz Pumpen | Schlauchhalterung für Bedieneinheit
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)
Hose holder

Hose holder

for the series ST10, SL10, LM10, UN10, VA10, HDO 080, HDO 120; HDO 200, HDO 250, HDO 400, HDO 500

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0230-303
  • upon request
Description: The hose bracket for the control unit is used for decentralized installation...more
Product information "Hose holder"

Description:

The hose bracket for the control unit is used for decentralized installation of the modules to a hose line.

 

Technical data
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Produktgruppe: Exzenterschneckenpumpen
Accessories group: Mounts / Suspensions

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support