Nominal width: DN 19 (3/4")
The hose clamp is made of stainless steel and is suitable for binding delivery hoses at the pump outlet or accessories.
- the nominal width of the clamp corresponds to DN19 (3/4")
Features & Advantages
- Clamping range from 28.0 - 31.0 mm
|Produktgruppe:||Fasspumpen / Containerpumpen|
|Accessories group:||Hose connection / Hose clips|
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter