Lutz Pumpen | Universal-Chemieschlauch für Nahrungsmittel, Kosmetika
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)
Universal chemical hose

Universal chemical hose

for chemicals, food and hygiene products

Nominal width:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0374-476
  • op verzoek
  • suitable for flammable and easily combustible liquids (e.g. ethanol, petrol) or in explosive environments
Description: The Hose is suitable for pure chemicals, cosmetics, photographic...more
Product information "Universal chemical hose"

Nominal size: DN 25 (1")
Note: Electrically conductive: Type ?/T (<106 Ohm between the fittings, <109 Ohm through the hose wall) according to DIN EN 12115:2011
.


Nominale diameter DN 19 (3/4")

Description:

The Hose is suitable for pure chemicals, cosmetics, photographic chemicals, paints and adhesives, detergents and cleaners, hygiene products, and food and beverages. It is FDA and USP Class VI compliant. The Hose is electrically conductive so that it can also be used in potentially explosive environments.

  • Nominal size: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50

Features & advantages

  • Operating pressure up to max. 16 bar
  • Colour coding: "Blue/White/Blue".
  • Complies with EU regulations 10/2011 and 1935/2004
  • Negative pressure max 0.9 bar
Technical data
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Temperature of medium (max °F): max. 212 °F
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion Protection: Yes
Certification: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU), FDA-compliant, Verordnung (EG) 1935/2004
Produktgruppe: Fasspumpen / Containerpumpen, Exzenterschneckenpumpen, Membranpumpen
Accessories group: Hoses / Discharge spouts / Suction pipe

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Ex-protection
DN 25 (1")
max. 16 bar
Special chemical hose PTFE Special chemical hose PTFE
for common and high purity media
Service & Support