Pump tube vertical Container pump B50 | Vertical Container Pumps B50 | Container Pumps | Drum and Container Pumps | Products | Lutz - USA
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)

Pump tube vertical Container pump B50

for chemical transfer

Drive shaft:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • US-0180-501
  • upon request
  • is suitable for emptying IBC tanks and containers
Description: The Container pump is suitable for the rapid transfer of corrosive, aqueous...more
Product information "Pump tube vertical Container pump B50"

Drive shaft: Stainless steel (1.4571) Shaft


Description:

The Container pump is suitable for the rapid transfer of corrosive, aqueous to slightly viscous media. Perfectly suited for the removal or transfer of chemical liquids.

  • Media examples: battery acid, ferrous sulfate, glycols, phosphoric acid, hydrochloric acid, citric acid, etc.
  • Pump tube equipped with Lutz original hand wheel
  • For filling or transferring IBC containers

Features & Advantages

  • adjustable container adapter for common container openings
  • high delivery rate
  • optimized Container emptying
  • low wear
  • variable adaptation to different container openings
  • easy and quick to dismantle due to few components 
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): PP (polypropylene)
Impeller (material): PPO (Polyphenylenoxid) / PPE (Polyphenylenether)
Static seal (material): FPM (fluororubber)
Mechanical seal (material): Kohle, SiC, HC-4 (2.4610)
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
density (up to kg/dm³): 1.8
Viscosity (up to max. cps)*: up to 100 cps (e.g. milk)
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Radial-flow impeller
Immersion length: 1100
Thread (inch) outside: 1 1/2"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Type: B50 PP/ SS

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support