Exzenterschneckenpumpwerk B70V-D Industrie
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)
Eccentric screw pump tube B70V-D Industry

Eccentric screw pump tube B70V-D Industry

for three-phase motors

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • US-0173-004
  • upon request
  • For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), Universal joint shaft (GW) and PTFE stator.
Description: The Eccentric screw pump B70V-D 12.1 in the industrial version is a powerful...more
Product information "Eccentric screw pump tube B70V-D Industry"

Delivery rate: 12 l/min. 
Drive shaft: Universal joint shaft (GW)
Type of seal Packing gland 
Note: Optionally, stator size 25.2 (0173-254) can be selected to overcome higher delivery heads


Description:

The Eccentric screw pump B70V-D 12.1 in the industrial version is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.

  • Cardan shaft versions also available in special immersion depths of 500 - 2000 mm
  • Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials

Features & Advantages

  • Uniform volume flow
  • Easy and fast cleaning
  • Gentle, low-pulsation product conveying
  • Low wear
  • Ideal for mobile use
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Edelstahl (1.4571/1.4404)
Static seal (material): FPM (fluororubber)
Drive shaft (material): Edelstahl (1.4571)
Stator (Werkstoff): PTFE (Polytetrafluorethylen)
Rotor (Werkstoff): Edelstahl (1.4571)
Stopfbuchse (Werkstoff): PTFE (Polytetrafluorethylen)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
delivery head (up to max. psi)*: 87
Temperature of medium (max °F): 284
Viscosity (up to max. cps)*: 30000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Gelenkwelle (hochviskose Medien)
Seal type: Stopfbuchse
Immersion length: from 39" (1000 mm)
Immersion tube diameter (up to mm): 2.1
Statorgröße: 12.1
Thread (inch) outside: 1 1/2"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Type: B70V-D

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

12 l/min.
Mechanical seal (GLRD)
Stator PTFE
Eccentric screw pump tube B70V-SR Industry Eccentric screw pump tube B70V-SR Industry
with reduction gear for electric motors
12 l/min.
Packing gland
Stator PTFE
Eccentric screw pump tube B70V-SR Industry Eccentric screw pump tube B70V-SR Industry
with reduction gear for electric motors
12 l/min.
Mechanical seal (GLRD)
Stator PTFE
Service & Support