||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-1314708-3', 'auto'); ga('require', 'GTM-M2BXSQ5'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Pump tube PP for mixing and pumping | For mixing and pumping | Pump tubes | Drum and Container Pumps | Products | Lutz - USA

Mit * gekennzeichnete Felder sind Pflichtfelder.
Family business since 1954
800 8 43 39 01 (toll free)
Pump tube PP for mixing and pumping

Pump tube PP for mixing and pumping

for low viscosity lyes


Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • US-0110-350
  • upon request
  • not suitable for flammable liquids
Description: The Drum pump is suitable for corrosive, aqueous to slightly viscous...more
Product information "Pump tube PP for mixing and pumping"

Immersion depth: 1000 mm
Type of seal : sealless (DL)


The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. Thus you are flexible at any time and thus save important resources. 

  • also available in special immersion depths from 200 - 2500 mm
  • Pump tube equipped with Lutz original handwheel
  • Suitable for mixing and pumping oils such as rapeseed oil and vegetable oil

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Two functions (pumping and mixing) in one unit
  • No leakage in case of inclined position or moving of the pumping unit
  • High mixing and conveying capacity for thorough homogenization
  • Switching between the pumping and mixing functions takes place without disturbing the ongoing operation, which is made possible by a small lever on the handwheel
Technical data
Pump tube (material): PP (polypropylene)
Impeller (material): PP (polypropylene)
Mechanical seal (material): Carbon, SiC, FPM, HC-4 (2.4610)
Static seal (material): no seals in contact with the medium, FPM (fluororubber)
Drive shaft (material): Edelstahl (1.4571)
Bearing (material): ETFE / PTFE
Flow rate (up to max. GPM)*: 24
delivery head (up to max. ft)*: 69
Temperature of medium (max °F): 122
density (up to kg/dm³): 1.9
Viscosity (up to max. cps)*: 800
Immersion length: from 39" (1000 mm)
Immersion tube diameter (up to mm): 2
Type of impeller: Radial-flow impeller
Seal type: Sealless (SL), Mechanical seal (MS)
Thread (inch) outside: 1 1/4"
Type: MP PP 50/41-L DL SS, MP PP 50/41-L-GLRD

* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt.

** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler

Service & Support