window.ga=window.ga||function(){(ga.q=ga.q||[]).push(arguments)};ga.l=+new Date; ga('create', 'UA-1314708-3', 'auto'); ga('require', 'GTM-M2BXSQ5'); ga('set', 'forceSSL', true); ga('set', 'anonymizeIp', true); ga('require', 'displayfeatures'); ga('require', 'cleanUrlTracker'); ga('require', 'outboundLinkTracker'); ga('require', 'ec'); ga('send', 'pageview'); ga('set', 'nonInteraction', true); setTimeout("ga('send', 'event', 'read', '20 seconds')", 20000); Pump tube PP for residual emptying | For complete drum drainage | Pump tubes | Drum and Container Pumps | Products | Lutz - USA
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)
Pump tube PP for residual emptying

Pump tube PP for residual emptying

for low viscosity lyes

Immersion depth:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • US-0103-020
  • upon request
  • not suitable for flammable liquids
Description: The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly...more
Product information "Pump tube PP for residual emptying"

Immersion depth: 700 mm
Type of seal: Mechanical seal  (MMS)


Description:

The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. 

  • also available in special immersion depths from 200 - 2500 mm
  • Pump tube equipped with Lutz original handwheel
  • Suitable for Drum emptying oils such as rapeseed oil and vegetable oil

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Optimised drum residue emptying with remaining residual quantity of approx. 0.1 litre
  • No leakage in case of inclined position or repositioning of the pumping unit
  • Maximum product utilisation with reduced drum cleaning and disposal costs
  • Sealing module of the mechanical seal (GLRD) pump can be replaced
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): PP (polypropylene)
Impeller (material): PP (polypropylene)
Mechanical seal (material): Kohle, Keramik, FPM, HC-4 (2.4610)
Static seal (material): FPM (fluororubber)
Drive shaft (material): Edelstahl (1.4571)
Bearing (material): Edelkohle
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to max. GPM)*: 16
delivery head (up to max. ft)*: 43
Temperature of medium (max °F): 122
density (up to kg/dm³): 2.0
Viscosity (up to max. cps)*: 1000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Immersion length: from 19" (500 mm), from 39" (1000 mm), from 47" (1200 mm)
Immersion tube diameter (up to mm): 1.26
Type of impeller: Radial-flow impeller
Seal type: Mechanical seal (MS)
Thread (inch) outside: 1 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Type: RE PP 41-L GLRD SS

* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt.

** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler

Service & Support