No results were found for the filter!
Bracket
for Container pump B200
Description: The bracket relieves pressure on the discharge spout when heavy engines are used and the turnbuckle cannot be used.
Tri-Clamp Connections
suitable for Eccentric screw pump B70V - 120.1
Description: The Tri-Clamp reducer is suitable for connection to Eccentric screw pump tube B70V - 120.1. Features & Advantages Connection: DN 50 to G 1 1/2" AG Consisting of adapter fitting Tri-Clamp incl. EPDM seal and Tri-Clamp closing clip
Pulse generator ring
for contactless indirect quantity measurement
Description: The pulse generator ring must be ordered additionally to match the shaft diameter of the motor. for Eccentric screw pumps Features & Advantages for shaft diameter: Ø 19 / Ø 20 / Ø 24 / Ø 25 / Ø 28 / Ø 30
Support bracket
with integrated pulse sensor
Description: The carrying bracket with integrated pulse sensor is the perfect upgrade for your B70V-D Eccentric screw pump. Magnetic pulses from the rotating motor shaft are transmitted to the pulse sensor without contact via a pulse encoder ring. The recorded pulses are evaluated in the Lutz BE10 operating unit and output on the display as the conveyed flow rate on the...
Ex-protection
Stainless steel (1.4408)
Tri-Clamp reducer
DN 50 to DN 25 / 32 / 40
Description: The Tri-Clamp reducer is suitable for connecting Tri-Clamp fittings to a spigot. Material made of stainless steel (1.4408) Properties & advantages Connection of Tri-Clamp fittings DN 25 / 32 / 40 Connection to Tri-Clamp DN 50 spigots
Compressed air
Compressed air motor 4/GT
Description The Compressed air motor is suitable for viscous, highly flammable, combustible liquids. Overload proof Features & Advantages high performance and high efficiency due to optimized flow design very good handling due to low weight very good starting behaviour
Drum pump MP-SS with motor B 55-T-5 (120 V)
Suitable for mixing and pumping corrosive and neutral, aqueous up to slightly monitoring in non-explosive areas. Liquid examples: Emulsions, suspensions and dispersions, paints and lacquers Features: Two functions (pumping and mixing and pumping) in one unit No grease fillings Modular, service friendly design Benefits: Change between "pumping" and "mixing and pumping"...
Drum pump MP-PP with motor MA II 3
Suitable for mixing and pumping of corrosive and neutral, aqueous up to slightly viscous liquids in non-explosive areas. Liquid examples: Emulsions, suspensions and dispersions, paints and lacquers, etc. Features: Two functions (pumping and mixing and pumping) in one unit No grease fillings Modular, service friendly design Benefits: Change between "pumping" and "mixing...
Battery
suitable for the Motor B1 Battery
Description: The battery is suitable for the battery motor B1 Battery and consists of high quality Li-Ion cells. 1 battery charge empties approx. 2 x 200 litre containers Features & Advantages long life span high cycle stability Voltage: 10,8 V
Three-phase motor with frequency converter
Powerful and quiet three-phase drive with integrated frequency converter. Smooth running and quiet Easy to maintain Protection class IP54 Energy efficiency class IE 3 according to EU regulations 640/2009 and 04/2014 Version with integrated frequency converter for infinitely variable speed adjustment, delivery and discharge mode via display. 230/400 V, 50 Hz Special voltages,...
Drum pump RE-SS with motor B 55-T-5 (120 V)
Suitable for complete drum drainage with corrosive and neutral, aqueous up to slightly viscous liquids in non-explosive areas. Liquid examples: Alum, borax, diesel fuel, freon, diethanolamine, methylene chloride, perfume oils, trichloromethane, etc. Features: Optimized drum drainage with a residual quantity of approx. 0,1 litres No grease fillings Also available in...