No results were found for the filter!
Battery
Battery Motor
See details
suitable for B1 Battery
Description: The battery motor B1 Battery is suitable for low viscosity, aqueous to slightly viscous media in laboratory and technical applications. Perfectly suited for the removal or decanting of smallest quantities. Exchangeable, powerful rechargeable battery with Li-Ions Battery life 25 min at maximum speed 1 battery charge empties approx. 2 x 200 litre containers...
Battery
Battery Motor
See details
suitable for B2 Battery
Description: The battery motor B1 Battery is suitable for low-viscosity, aqueous to slightly viscous media in laboratories and technical areas. It is suitable for the withdrawal of small containers such as Canister or hobbocks. Depending on the requirements, the Motor can be used with a wide range of pumping units made of PP, PVDF and stainless steel. Exchangeable, powerful...
Ex-protection
Rotor
Pump tube Niro for mixing and pumping
See details
for flammable liquids
Description: The Lutz Pump tube (Niro) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped with Lutz original...
Ex-protection
Impeller
Pump tube Niro for residual drainage
See details
for flammable liquids
Description: The Lutz Pump tube for residual emptying (Niro) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. also available in special immersion depths from 200 - 2500 mm...
Ex-protection
Rotor
Pump tube HC
See details
for flammable chemicals
Description: The Lutz Pump tube (HC) is suitable for low viscosity, flammable and highly corrosive chemicals. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube...
Explosion protection
Impeller
Pump tube HC
See details
for flammable chemicals
Description: The Lutz Pump tube (HC) is suitable for low viscosity, flammable and highly corrosive chemicals. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube...
Ex-protection
Rotor
Pump tube Niro
See details
for flammable liquids
Description: The Lutz Pump tube (Niro) is suitable for thin-bodied, flammable and explosive liquids. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped with...
Ex-protection
Impeller
Pump tube Niro
See details
for flammable liquids
Description: The Lutz Pump tube (Niro) is suitable for thin-bodied, flammable and explosive liquids. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped with...
HC Wave
Rotor
Pump tube PP for mixing and pumping
See details
for low viscosity acids
Description: The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped with...
Stainless steel shaft
Rotor
Pump tube PP for mixing and pumping
See details
for low viscosity lyes
Description: The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped with...
HC Wave
Impeller
Pump tube PP for mixing and pumping
See details
for low viscosity acids
Description: The Lutz Pump tube (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped with...
Stainless steel shaft
Impeller
Pump tube PP for mixing and pumping
See details
for low viscosity lyes
Description: The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. Thus you are flexible at any time and thus save important resources. also available in special immersion depths from 200 - 2500 mm Pump tube equipped with Lutz original...