No results were found for the filter!
PP
1,5 m
Set accessories
for Drum pump Lutz B2 Vario PP
Description: The set accessory is for low viscosity, aqueous to slightly viscous media. The set is suitable for the B2 Vario pump in PP and stainless steel versions. also available in special lengths on request
Level probe
for dry-running/overflow protection
Description: The limit level probe detects the minimum residual quantities in containers of conductive liquids. It has the function of dry run or overflow protection. simple installation by means of a sensor rod in the Drum Features & Advantages Dry run/overflow protection Emergency stop function of the motor in case of critical filling level Plug & play
Gasket FPM
Dichtung FPM
Check valve Niro
for Container pump B200 Niro
Description: The check valve prevents liquids from flowing back into the pump when stopped. for Container pump B200 Features & Advantages Material: stainless steel (1.4301) / stainless steel (1.4401) Nominal size: DN 32 Prevents the liquid from flowing back into the pump
Turnbuckle
for Container pump B200
Description: The turnbuckle relieves pressure on the discharge spout when heavy engines are used.
Transport trolley
suitable for horizontal Eccentric screw pump B70H
Description: The transport cart is suitable for the horizontal Eccentric screw pump tube B70H. Features & advantages Dimensions trolley: 820 x 520 x 940 mm Dimensions with pump nominal dimension 400 mm: 1062 x 520 x 940 mm Dimensions with pump nominal dimension 500 mm: 1162 x 520 x 940 mm
Ex-protection
2m
Equipotential bonding cable
for the DMP 1/4" to 1
Description: The equipotential bonding cable is used for the electrically conductive connection between explosion-proof pump and container has the function of earthing and equipotential bonding. 2 m with fixing clip Features & Advantages Function of grounding and potential equalization
Battery
Battery Motor
suitable for B1 Battery
Description: The battery motor B1 Battery is suitable for low viscosity, aqueous to slightly viscous media in laboratory and technical applications. Perfectly suited for the removal or decanting of smallest quantities. Exchangeable, powerful rechargeable battery with Li-Ions Battery life 25 min at maximum speed 1 battery charge empties approx. 2 x 200 litre containers...
Battery
Battery Motor
suitable for B2 Battery
Description: The battery motor B1 Battery is suitable for low-viscosity, aqueous to slightly viscous media in laboratories and technical areas. It is suitable for the withdrawal of small containers such as Canister or hobbocks. Depending on the requirements, the Motor can be used with a wide range of pumping units made of PP, PVDF and stainless steel. Exchangeable, powerful...
0,5 m
Set emission protection Hose
suitable for the gas pendulum system for mobile...
Description: The emission protection hose - set directs rising gases back into the tank in seal-less pumping stations.
Ex-protection
120 V
Power supply unit Ex-NG10m
Power supply also in hazardous areas
Description: The power supply unit provides the power supply for the control unit. When using a relay module, no additional power supply unit is required, as the module contains the power supply function. For direct application in hazardous areas (Zone 1 & Zone 2) Takes over power supply for the complete flow meter system e.g. in case of frequent filling processes or...
Food
DN 19 (3/4")
2 m
Hose set Pure
for watery and fatty food
Description: The hose set is suitable for aqueous and greasy food . The set is used for connection to the Pump tube or the Nozzle. on request also available in special lengths Features & Advantages Hose connection: Tri-Clamp DN 32 Nominal width: DN 19 (3/4")