No results were found for the filter!
Bracket
for Container pump B200
Description: The bracket relieves pressure on the discharge spout when heavy engines are used and the turnbuckle cannot be used.
Tri-Clamp Connections
suitable for Eccentric screw pump B70V - 120.1
Description: The Tri-Clamp reducer is suitable for connection to Eccentric screw pump tube B70V - 120.1. Features & Advantages Connection: DN 50 to G 1 1/2" AG Consisting of adapter fitting Tri-Clamp incl. EPDM seal and Tri-Clamp closing clip
Pulse generator ring
for contactless indirect quantity measurement
Description: The pulse generator ring must be ordered additionally to match the shaft diameter of the motor. for Eccentric screw pumps Features & Advantages for shaft diameter: Ø 19 / Ø 20 / Ø 24 / Ø 25 / Ø 28 / Ø 30
Support bracket
with integrated pulse sensor
Description: The carrying bracket with integrated pulse sensor is the perfect upgrade for your B70V-D progressive cavity pump. Magnetic pulses from the rotating motor shaft are transmitted to the pulse sensor without contact via a pulse transmitter ring. The recorded pulses are evaluated in the Lutz BE10 operating unit and output on the display as the delivered flow rate on...
Ex-protection
Stainless steel (1.4408)
Tri-Clamp reducer
DN 50 to DN 25 / 32 / 40
Description: The Tri-Clamp reducer is suitable for connecting Tri-Clamp fittings to a spigot. Material made of stainless steel (1.4408) Properties & advantages Connection of Tri-Clamp fittings DN 25 / 32 / 40 Connection to Tri-Clamp DN 50 spigots
Akku
Battery
suitable for the Motor B1 Battery
Description: The battery is suitable for the battery motor B1 Battery and consists of high quality Li-Ion cells. 1 battery charge empties approx. 2.6 x 200 litre containers Features & Advantages long life span high cycle stability Voltage: 10,8 V
Charging station for motor B1 Battery
passend für den Motor B1 Battery
Charging station for motor B1 Battery (without Battery) Input: AC 100-240 V, 50/60 Hz
Suspension device
for Motor MD-200
Used for safe storage of the Drum- and laboratory pump B2 Vario. The pumps are thus protected and their utility value is increased.
Nozzle PP
For filling and transferring neutral and aggressive liquids. With protective clip and two outlet nozzles Ø 23 mm (cylindrical) and Ø 12 mm (conical). Housing and valve tappet made of polypropylene (PP). Operating pressure: max. 3 bar at 20 °C Viscosity: max. 760 mPas Flow rate: max. 50 l/min (water) Pumped medium temp: max. 50 °C Weight: approx. 0.25 kg
Nozzle PVDF
For filling and transferring neutral and aggressive liquids. With protective bracket and two outlet nozzles Ø 23 mm (cylindrical) and Ø 12 mm (conical). Body and valve tappet made of polyvinylidene fluoride (PVDF). Operating pressure: max. 3 bar at 20 °C Viscosity: max. 760 mPas Flow rate: max. 50 l/min (water) Pumped medium temp: max. 80 °C Weight: approx. 0,3 kg Seals: FPM