Hose connection | Double Diaphragm Pumps | Accessories | Products | Lutz - USA
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)
Hose connection

Hose connection

with internal thread connection 1 1/4"

Material:

Nominal width:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0204-428
  • op verzoek
Description: The hose connector connects the delivery hoses to the Pump tube, the Double...more
Product information "Hose connection"

Material: Polypropylene (PP)
Nominal width: DN 19 (3/4")
Note: The hose connector
 


Nominale diameter DN 13 (1/2")

Description:

The hose connector connects the delivery hoses to the Pump tube, the Double diaphragm pumps or the Nozzle. When using a Double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection

  • special connections are available on request

Features & Benefits

  • Nominal sizes: DN 13 / DN 19 / DN 25 / DN 32
  • Materials PP / PVDF / Alu / Stainless steel / HC
Technical data
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Produktgruppe: Membranpumpen
Accessories group: Hose connection / Hose clips

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support