Special chemical hose FEP | Double Diaphragm Pumps | Accessories | Products | Lutz - USA
PREIS ANFRAGEN
Please enter these characters in the following text field.

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)
Special chemical hose FEP

Special chemical hose FEP

for high purity products

Nominal width:

Preis anfragen
Please enter these characters in the following text field.

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0374-429
  • op verzoek
  • not suitable for non-conductive, ignitable liquids
Description: The Hose is suitable for all common media, as well as high purity products....more
Product information "Special chemical hose FEP"

Nominal size: DN 25 (1")
Note: Electrically conductive: type Ω-C (<106 Ohm between fittings) according to DIN EN 12115:2011 


Nominale diameter DN 19 (3/4")

Description:

The Hose is suitable for all common media, as well as high purity products. It can be used either as pressure or suction hose and complies with FDA and USP Class VI requirements.

  • Nominal size: DN 19 / DN 25 / DN 32 / DN 38 / DN 50

Features & Advantages

  • Operating pressure up to max. 16 bar
  • Colour coding: "Blue/White/Red"
  • Negative pressure max. 0.9 bar
Technical data
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Temperature of medium (max °F): max. 212 °F
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Certification: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU), FDA-compliant
Produktgruppe: Fasspumpen / Containerpumpen, Exzenterschneckenpumpen, Membranpumpen
Accessories group: Hoses / Discharge spouts / Suction pipe

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

DN 32 (1 1/4")
max. 7 bar
1 m
PVC-Hose, fabric reinforced PVC-Hose, fabric reinforced
for aggressive and non-flammable liquids
DN 25 (1")
max 5 bar
1 m
PVC spiral hose PVC spiral hose
for aggressive and non-flammable liquids
Service & Support