Lutz Pumpen | PTFE-Schlauch, Nennweite DN 8, DN 13
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)
PTFE-Hose

PTFE-Hose

Nominal width:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0374-445
  • op verzoek
Description: The Hose is used to supply air to the Compressed air motors or the Diaphragm...more
Product information "PTFE-Hose"

Nominal width: DN 13 (1/2")


Nominale grootte DN 13

Description:

The Hose is used to supply air to the Compressed air motors or the Diaphragm pumps.

  • DN 8 / DN 13

Features & Advantages

  • Material: PTFE
  • Operating pressure up to max. 6,5 bar
  • Negative pressure up to max. 0.7 bar
Technical data
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Temperature of medium (max °F): max. 212 °F
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Produktgruppe: Membranpumpen
Accessories group: Hoses / Discharge spouts / Suction pipe

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support