No results were found for the filter!
PP
DN 19 (3/4")
Outlet bend
See details
in the polypropylene (PP) version
Description: The discharge elbow allows liquids to be transferred or filled directly into another container. They are available in PP, aluminium and stainless steel and are screwed onto the pump outlet. Nominal sizes: DN 19 / DN 25 Features & Advantages Enables quick and direct transfer of liquids Union nut (1 1/4")
Suspension device
See details
for Pump tubes with handwheel
Description: The suspension device is used to store the Drum Pumps and protects it from falling over. for Pump tubes with hand wheel Features & Advantages Protects from falling over Increases the utility value
Ex-protection
Stainless steel
Clamping device
See details
for Pump tubes PP, PVDF, Alu, Niro and HC
Description: The clamping device is for fastening the Drum pump in in open and thick-walled barrels and containers suitable for a wide range of pumping station diameters Features & Advantages Material made of stainless steel
Support bracket
See details
for Motor MA II and ME II
Description: The carrying handle makes it easier to lift the pump out of or immerse it in the drums or containers. In the case of an explosion-proof drive motor, the explosion protection switch is attached to the support bracket for Motor MA II / ME II / B4/GT / three-phase motor / single-phase motor / three-phase motor for reduction gears Features & Advantages No heavy...
Connection cable
See details
Description: The connection cable is for extending the cable for the universal motors (2, or 3-wire) and the three-phase motors (4-wire). depending on the requirements, the cable can be supplied in the desired length
Cekon plug
See details
for three-phase motors B4/GT and centrifugal...
for three-phase motors B4/GT and submersible centrifugal pump B6 Description: The Cekon - plug is suitable for three-phase geared motors B4/GT and submersible centrifugal pump B6 5-pole plug Features & Advantages Amps: 16 A
Ex-protection
AC
CEAG
Ex-plug
See details
for Motor ME II and for B70V-SR (Ex)
Description: The CEE - round plugs are suitable for the rotary commutators (three-phase current) and the electric motors (alternating current) and are used in the hazardous areas or environments. splash-proof Features & Advantages Certification: II 2G Ex db eb IIC T6 Gb Protection class: IP 65 Three-phase (3-pole) or alternating current (5-pole)
Ex-protection
DN 25 (1")
max. 16 bar
Universal chemical hose
See details
for chemicals, food and hygiene products
Description: The Hose is suitable for pure chemicals, cosmetics, photographic chemicals, paints and adhesives, detergents and cleaners, hygiene products, and food and beverages. It is FDA and USP Class VI compliant. The Hose is electrically conductive so that it can also be used in potentially explosive environments. Nominal size: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN...
DN 25 (1")
max. 16 bar
DN 25 (1")
Special chemical hose FEP
See details
for high purity products
Description: The Hose is suitable for all common media, as well as high purity products. It can be used either as pressure or suction hose and complies with FDA and USP Class VI requirements. Nominal size: DN 19 / DN 25 / DN 32 / DN 38 / DN 50 Features & Advantages Operating pressure up to max. 16 bar Colour coding: "Blue/White/Red" Negative pressure max. 0.9 bar
Ex-protection
AC
CEAG
Ex socket
See details
for Motor ME II and for B70V-SR (Ex)
Description: The CEE - socket are suitable for the rotary commutators (three-phase current) and the electric motors (alternating current) and are used in the hazardous areas or environments. splash-proof Features & Advantages Certification: II 2G Ex db eb IIC T6 Gb Protection class: IP 65 Three-phase (3-pole) or alternating current (5-pole)
Clutch
See details
for the compressed air supply of the Double...
Description: The coupling is self-closing and is screwed into the maintenance unit or filter pressure reducer. Material: Brass Features & Advantages Nominal widths 7.2 and 10 mm Connection type external thread 3/8"
Brass
7.2 mm
3/8" MALE
Plug-in nipple
See details
for the compressed air supply of the air motors...
Description: The brass push-in nipple is required for connection to the compressed air hose, thus enabling a trouble-free compressed air supply. Material: Brass Properties & Advantages Nominal widths: 7.2 and 10mm