Seal type: Mechanical seal FPM (MS FPM)
Version: without Pure
Note: without Ex approval
Description:
The horizontal Pump tube is suitable for emptying highly aggressive, thin-bodied, flammable and explosive liquids from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps.
Depending on the application, different Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources.
- Horizontal connection at the bottom run of the container
- Pump tube equipped with Lutz original hand wheel
- Suitable for emptying alternative fuels, oils, flammable liquids
Features & advantages
- Optionally with electric or compressed air drive
- Low loss of medium when disconnected
- Explosion-proof versions for applications in hazardous areas (Zone 1 and 2)
- Easy to dismantle
- Low space requirement
Suitable media: | Emulsionen, Säuren, Desinfektionsmittel, Pflegemittel, Reinigungsmittel, Mineralöle, Pflanzenöle, Lösemittel, Wasser, Laugen |
Pump tube (material): | Niro (Edelstahl) |
Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
Static seal (material): | FPM (fluororubber) |
Bearing (material): | Edelkohle |
Drive shaft (material): | Edelstahl (1.4571) |
Flow rate (up to max. GPM)*: | 64,5 |
delivery head (up to max. ft)*: | 49 |
Temperature of medium (max °F): | 212 |
density (up to kg/dm³): | 2.8 |
Viscosity (up to max. cps)*: | 1000 |
Type of impeller: | Axial-flow rotor |
Seal type: | Mechanical seal (MS) |
Type: | B200 Niro 41-R-GLRD |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter