Pumpwerk Niro
PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)
Pump tube Niro

Pump tube Niro

for flammable liquids

Immersion depth:

Seals:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • US-0150-000
  • upon request
  • The Atex guidelines can only be complied with if a Pump tube with an explosion-proof Motor is used for highly flammable liquids.
Description: The Lutz Pump tube (Niro) is suitable for thin-bodied, flammable and...more
Product information "Pump tube Niro"

Immersion depth: 700 mm
Type of seal: sealless (DL)


Description:

The Lutz Pump tube (Niro) is suitable for thin-bodied, flammable and explosive liquids. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. 

  • also available in special immersion depths from 200 - 2500 mm
  • Pump tube equipped with Lutz original hand wheel
  • Suitable for filling or transferring alternative fuels, oils, flammable liquids

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Approved according to ATEX directive 2014/34/EU, category 1/2
  • Highly resistant noble carbon shaft bearings
  • Maintenance without special tools
  • Seal modules of the mechanical seal (MS) or seal-less (SL) pump can be replaced
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Niro (Edelstahl)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): Edelkohle
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to max. GPM)*: 54
delivery head (up to max. ft)*: 40
Temperature of medium (max °F): 212
density (up to kg/dm³): 1.4
Viscosity (up to max. cps)*: 650
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Axial-flow rotor
Seal type: Sealless (SL)
Immersion length: from 19" (500 mm)
Immersion tube diameter (up to mm): 1.6
Thread (inch) outside: 1 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion Protection: Yes
Certification: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU)
Type: Niro 41-R-DL

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support