Motor: MD2xL - 1000W, 6 bar, comfort handle (for a higher density of the medium)
Immersion depth: 1000 mm (sealless)
Description:
The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the removal or decanting of acids.
- Examples of media: Hydrochloric acid, battery acid, ferric chloride, phosphoric acid, chromic acid and citric acid etc.
- Pump tube equipped with Lutz original hand wheel
- Suitable for decanting or transferring oils such as rapeseed oil and vegetable oil
Features & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped medium by lubricants
- Optimized Drum emptying
- Universally resistant PTFE shaft bearings
- Maintenance without special tools
- Seal modules of the seal-less (SL) pump can be replaced
Suitable media: | Akkusäure, Chromsäure, Zitronensäure, Eisen-III-Chlorid, Phosphorsäure, Salzsäure |
Pump tube (material): | PP (polypropylene) |
Impeller (material): | PP (polypropylene) |
Static seal (material): | no seals in contact with the medium |
Mechanical seal (material): | no seals in contact with the medium |
Bearing (material): | ETFE / PTFE |
Drive shaft (material): | Hastelloy C (2.4610) |
Flow rate (up to max. GPM)*: | 23, 25 |
Flow rate with Nozzle: | 13,2 |
delivery head (up to max. ft)*: | 52 , 69 |
Temperature of medium (max °F): | 122 |
density (up to kg/dm³): | 1.4, 2.8 |
Operating pressure (max. psi): | 87 |
Viscosity (up to max. cps)*: | 760 , 1000 |
Type of impeller: | Radial-flow impeller |
Seal type: | Sealless (SL) |
Immersion length: | from 39" (1000 mm), from 47" (1200 mm) |
Immersion tube diameter (up to mm): | 1.6 |
Thread (inch) outside: | 1 1/4" |
Schlauchlänge (mm): | 78 |
Type of drive: | Electric, Compressed air |
Output (W): | 640, 1000 |
Voltage: | 120 |
Frequency (Hz): | 60 |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler