:Lutz nozzle PP, 1.5 m PVC hose DN 19 (3/4"), hose connector PP with union nut PVC, hose clamps
The hose set is for thin-bodied, aqueous to slightly viscous media.
The set is suitable for barrel pumps series B1 and B2.
- also available in special lengths on request
|Produktgruppe:||Fasspumpen / Containerpumpen|
|Accessories group:||Hoses / Discharge spouts / Suction pipe|
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter