Fasspumpe elektrisch, für hochkorrosive Chemikalien, Säure
PREIS ANFRAGEN
Please enter these characters in the following text field.

Mit * gekennzeichnete Felder sind Pflichtfelder.
LUTZ PUMPS, INC. | USA
Family business since 1954
info@lutzpumpsamerica.com
800 8 43 39 01 (toll free)

Drum pump - concentrated acids and alkalis

for highly chemical liquids and salts

Immersion depth:

Motor:

Preis anfragen
Please enter these characters in the following text field.

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0122-205 + 0060-004
  • upon request
  • not suitable for flammable liquids
Description: The Drum pump is suitable for corrosive, aqueous to slightly viscous...more
Product information "Drum pump - concentrated acids and alkalis"

Motor: MA II 3 - 460W, 230V
Immersion depth: 1000 mm (sealless)


Description:

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or transferring concentrated acids and alkalis.

  • Media examples: Chloric acid, chromic acid, sulfuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc.
  • Pump tube equipped with Lutz original handwheel

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Optimised Drum emptying
  • Universally resistant PTFE shaft bearings
  • Maintenance without special tools
  • Seal modules of the seal-less (SL) pump can be replaced
Technical data
▼ MEDIUM ▼
Suitable media: Natriumhypochlorit, Flusssäure, Salpetersäure, Chlorsäure, Schwefelsäure, Chromsäure
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): PVDF (polyvinylidene fluoride)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): ETFE / PTFE
Drive shaft (material): Hastelloy C (2.4610)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to max. GPM)*: 21, 25
delivery head (up to max. ft)*: 52 , 56
Temperature of medium (max °F): 212
density (up to kg/dm³): 1.6, 2.8
Operating pressure (max. psi): 87
Viscosity (up to max. cps)*: 600, 1000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length: from 39" (1000 mm), from 47" (1200 mm)
Immersion tube diameter (up to mm): 1.6
Thread (inch) outside: 1 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Type of drive: Electric, Compressed air
Output (W): 510, 1000
Voltage: 120
Frequency (Hz): 60
Version: Komfortgriff

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support